top of page

Orders begin in September, 2022.





Want to learn more about how credits work?
Check out HP Tuners' YouTube video explaining everything you need to know.


Not sure how many credits you need? Click Here to see the HP Tuners supported vehicle list and required credits.


Built for enthusiasts and professionals –

Introducing MPVI3 by HP Tuners, the fastest and most sophisticated OBDII interface device to date. Now standard with Pro Feature Set (PROLINK+ cable sold separately).



Pro is the new standard with MPVI3. Take advantage of Pro Feature Set capabilities like standalone data logging and PROLINK+ compatibility (sold separately) already built into your new device. MPVI3 redefines the limits of speed and control with faster standalone data logging and 2X the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation.



-Standard with Pro Feature Set

-2X Storage

-Faster Standalone Data Logging

-High-Resolution Accelerometer

But don’t be fooled, MPVI3 continues the legacy of its predecessor with features like Bluetooth 5.0, an M8 motorsports-grade screw-on connector, RGB LEDs, and USB-C connectivity (4MB/s).



Get equipped with the most inclusive scanning, logging, and calibration package in the industry. Connect > MPVI3 is an advanced OBDII interface tool, connecting your vehicle’s control modules to our VCM Suite software. Read > Run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Edit > Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. Write > When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Drive >>>


From dedicated, exempt race cars to tow rigs, off-road machines, next-level street cars, and fuel-efficient daily drivers, HP Tuners delivers the ultimate solution for builds and enthusiasts of any caliber.


VCM SCANNER – your feature-rich OBDII scanning & diagnostic software.

View, chart, and log all your diagnostic data in real-time via your vehicle’s OBDII diagnostic port–command fans, open/closed loop, gear select, timing, air-fuel ratio, and so much more. Read Diagnostic Trouble Codes (DTCs), experience standalone data logging, and explore a multitude of special functions like Gear/Tire Wizard. Built-in VCM controls are also supported.


VCM EDITOR – your comprehensive vehicle control module calibration software.

Get started by reading your vehicle’s different control modules’ flash memory and save it as an .HPT file. Adjust a multitude of parameters, like spark, fuel, RPM limits, fan temps and speeds, transmission shift points and pressures, exhaust valve control, speedometer settings, and so many more. Then, write all your changes back to the vehicle using your MPVI3.



Need to view more data with your MPVI3 from a wideband sensor, boost gauge, or other additional sensors? Get equipped with the PROLINK+ cable (sold separately), enabling users to wire in and record up to 2x analog signals (from a wideband sensor, map sensor, etc.) and 1x CAN bus signal simultaneously. Now standard with Pro Feature Set, MPVI3 is fully compatible with the PROLINK+ cable straight from the box.


*PROLINK+ is not required for MPVI3. The PROLINK+ cable must be wired in for use.



Does HP Tuners offer tuning support for your vehicle? You can check your year, make, and model on our Vehicles Page. Remember, you can still run diagnostics and data log with an MPVI3 device even if your vehicle is not supported (when a license is required).


HP Tuners MPVI3

  • WARNING: This is a RACE ONLY product manufactured and sold for installation on vehicles to be used solely for competition purposes, which, once installed, may never be used, or registered or licensed for use upon a public road or highway. If you install this part on your vehicle and use that vehicle on a public road or highway, you will be considered in violation of the Clean Air Act and personally subject to a civil penalty of $4,454.

    Clean Air Act Title II Section 203 Code 7522(a)(3)

    (A) for any person to remove or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter prior to its sale and delivery to the ultimate purchaser, or for any person knowingly to remove or render inoperative any such device or element of design after such sale and delivery to the ultimate purchaser; or

    (B) for any person to manufacture or sell, or offer to sell, or install, any part or component intended for use with, or as part of, any motor vehicle or motor vehicle engine, where a principal effect of the part or component is to bypass, defeat, or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter, and where the person knows or should know that such part or component is being offered for sale or installed for such use or put to such use; or .

    Unless explicitly stated otherwise, all products sold by ZFG Racing LLC. are designated Race Only and are solely for competition/off road use limited to racing formally sanctioned by a recognized racing organization. Any other use, including recreational off- road use, may be in violation of local, state, and Federal laws. ZFG Racing LLC does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the responsibility of the consumer.

    End User and its respective agents and Affiliates shall, comply at their own expense with all applicable local, national, regional and international laws, ordinances, regulations, codes, standards, directives and international conventions and agreements to the extent that any of the foregoing have the force of law by being directly enforceable by a governmental authority, a court or other proper tribunal.

    By purchasing and or use, the purchaser or end user (you) acknowledges the above warning.

    By purchasing and or use, the purchaser or end user (you) acknowledge that, there are potential risks and dangers that are involved with engine management tuning. Tuning is a test of the mechanical limits of your vehicle and can cause failure to components. It is strictly intended for off-road use and ZFG Racing, LLC can not be held responsible for emissions related issues caused by tuning. Any damage incurred before, during, or after the vehicle is being operated on, and tuned is in no way fault of ZFG Racing, LLC. Any damage to your vehicle is the responsibility of the vehicle(s) owner. Situations can arise during the tuning that is beyond the control of the tuner. You are aware of the potential risks involved with dyno or street testing / tuning and that you waive any and all claims against ZFG Racing,, LLC.


bottom of page